Enigma 2 IPTV Setup

Enigma 2 IPTV

Enigma 2 iPTV Installation Instructions Userboquest and Wget.

For your Enigma2 Devices, I will tell you how to throw iptv with the “Userboquest” File and Telnet command..

First of all, we download the FTP Program. Example ” File Zilla ” , Then from your device menu = setup = network = network hardware settings = IP address : 192.168x We find it.

Then we open FileZilla from our computer. Instead of Host URL = We write the IP of our device. Username: root password: dreambox (this information is standard, if it does not log in, there is a problem with your image)

After connecting to the device, we find the ETC/Enigma2 folder. We put the Userboquest file we gave you in this folder. Then, after making sure that the file is gone, we unplug the device and plug it in.

If the Image of your device supports iptv, when you come to the channel list, IP Plugins will be at the top. That’s all.

For your Enigma2 Devices, I will tell you how to throw iptv with the “Userboquest” File and Telnet command..

To throw Wget, we first download the “Putty” application to our PC and look at the IP address of our device in the same way.

Enigma 2 IPTV We tick the Puttyden telnet box, this is a must. then on the login screen, username : root asks for password : dreambox does not appear when typing password.

Then you paste the Wget command we gave you and press enter, it loads in 2 minutes, and when you turn the device off and on, the list will come.

Terms & conditionsPrivacy PolicyRefund & Returns 


0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply